Outer fabric composition: 100% Linen

Inner fabric composition: Lightweight fitted cotton

Craftspersonship
Owning a Helen Kaminski is a mark of style and sophistication. Each piece is unique and made with special care by their artisans to ensure its longevity as a wardrobe staple.

Cleaning
Fabric hat care may differ depending on the fabric composition. Some styles are hand washable while others should be taken to a specialist and dry-cleaned. Always follow the care & content instructions for your hats before proceeding with any cleaning. Cleaning a hat by hand is generally the most effective way. Follow the steps outlined below:

1. Fill a clean basin with cool water and the recommended amount of mild or delicate detergent. Baby shampoo also works.
2. Gently work the solution into the soiled areas using a soft-bristled brush or soft cloth. Start with the inner band, which is often the most marked part of a hat due to perspiration, make-up or hair products etc… Then continue to work the solution into the remainder of the hat.
3. Submerge and soak for 10 minutes.
4. Rinse with cool water until it runs clear.
5. Gently press out excess water using a towel, but do not wring. Rolling the hat inside the towel and pressing gently works well.
6. Lay flat in a well-ventilated area and reshape it as it dries.
7. Pending care instructions, a cool iron can be used on the brim. For best results, iron on a curved surface following the brim shape.

Reshaping
To restore hats to their original best shape, use the steam from an iron or clothes steamer to carefully reshape a crushed hat. Be careful not to over-steam or the entire hat can lose its shape.  Steaming can also assist with cleaning your hat as it loosens up dirt and allows you to brush off carefully using a soft-bristled brush.

If in the unfortunate circumstance you and your hat are caught in the rain, shake off excess water and stuff the crown using a clean white cloth or plain white tissue paper to help the hat hold its shape as it dries. Allow to air dry away from direct heat or sunlight. Be sure that the hat is completely dry before storing.

Longevity
To keep your hat looking it’s very best and in turn, extend its life, use a soft bristle brush or lint roller regularly to remove dust and lint. Slowly, workaround the hat, brushing with the grain of the fabric and taking care not to damage the trim or decorative embellishments. Where possible, remove trims to make brushing the hat more seamless.

Storing

• Store your hat in a box or on a clean surface.
• Make sure the hat is in a ventilated space away from direct light and moisture.
• If you’re not using a hatbox with a support, make sure the crown is supported by stuffing it with acid free tissue paper. Note: avoid printed or coloured paper as it may transfer onto your hat over time.
• Ensure the brim is not pressed against any hard surfaces. The key here is to ensure your brim keeps its shape and doesn’t sink down or flatten.
• If your hat is rollable, don’t keep it rolled for prolonged periods of time as this will make it harder to get the creases out.